SmartRack Premium 42U Server Rack Enclosure, Secure, Standard-Depth

SmartRack Premium 42U Server Rack Enclosure, Secure, Standard-Depth

Heavy-duty, locking, 42U Premium Rack Enclosure Cabinet that accommodates all standard 19-inch rackmount equipment and ships fully assembled for quick and easy deployment in secure, high-density server and IT networking environments.
Standard 24″ (600mm) width and 42″ (1050mm) depth for optimal use of floor space
Ships fully assembled
3000 lbs (1360.8 kgs) stationary / 2250 lbs (1020.6 kgs) rolling load capacity
Locking, removable, reversible front and rear doors
Locking, removable side panels keyed alike with doors
Pre-installed casters and leveling feet; Rolls through standard 7-ft. (2.13 m) doorway
Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance
5-year limited warranty

Ships fully assembled for rapid deployment and rolls into place on heavy-duty pre-installed casters (casters are removable)
Front and rear sets of equipment mounting rails adjust in 1/4″ increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).
Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
Tough textured powder coat finish resists conditions found in non-IT environments such as warehouses
Massive front-to-rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements
Maximum usable internal depth of 37 inches/94 cm (front to rear rail)
Weight ratings of 3000 lbs (1360.8 kgs) stationary and 2250 lbs (1020.6 kgs) rolling
Front door is locking, reversible and removable
Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer to a wall
Locking removable side panels are ‘half size’ to make them smaller and lighter improving ease of installation and servicing. Two side panels per side (4 panels total). Side panels are keyed alike to the front and rear doors.
Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24″ to match standard data center floor tiles
Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable
Compact design allows the enclosure to roll through standard height commercial doorways
Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and rear doors include quick-release ground wires.
Open bottom for cable access
Top panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first
Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of the rack
Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance
Compatible with airflow optimization and cable management accessories.

SR42UB Rack Enclosure
(4) side panels
(4) side panel locks
(2) door & side panel keys
(50) M6 screws
(50) M6 washers
(50) M6 cage nuts
Owner’s Manual

UPC Code 037332123770
Device Compatibility Patch Panel; Network Switch; UPS; Server
Rack Type Enclosure
Color Black
Factory Preset Rack Depth (cm) 70.5
Factory Preset Rack Depth (mm) 705
Maximum Device Depth (cm) 93.98
Maximum Device Depth (mm) 940
Minimum Device Depth (cm) 10.16
Minimum Device Depth (mm) 102
Rack Height 42U
Shipping Dimensions (hwd / cm) 215.90 x 115.57 x 66.04
Shipping Weight (kg) 152.41
Unit Dimensions (hwd / cm) 199.39 x 60.02 x 109.22
Unit Weight (kg) 127.46
Weight Capacity – Rolling (kg) 1,021
Weight Capacity – Stationary (kg) 1,361
Rack Depth Standard
Number of Vertical Mounting Rails 4

Grounding Lug Front and back door frames
Built-in Cable Management Yes
Extra Wide No

Certifications UL60950; RoHS; CE; IP20 Protection Rating
Approvals EIA/ECA-310-E

Product Warranty Period (Worldwide) 5-year limited warranty


There are no reviews yet.

Be the first to review “SmartRack Premium 42U Server Rack Enclosure, Secure, Standard-Depth”

Your email address will not be published. Required fields are marked *

Request a Quote