SmartRack 42U Standard-Depth Rack Enclosure Cabinet for Harsh Environments

SmartRack 42U Standard-Depth Rack Enclosure Cabinet for Harsh Environments

Protects sensitive electronic equipment from harsh conditions that would overwhelm a typical rack enclosure, including falling dirt, dust, drips and splashes. Ideal for use in factories, construction areas, utility plants, warehouses and other areas high in moisture, dust and debris.
Sealed, locking cabinet protects against dust, dirt, drips and splashes
Heavy-duty, torsion-resistant construction withstands jolts and vibrations in harsh working environments
Self-Sealing Cable Ports: Permit cable access while maintaining dust and moisture resistance
Louvered Doors with Sealing Gaskets: Keep out drips, splashing water and falling debris
Built-in Dust Filters: Are easy to remove and replace with standard off-the-shelf furnace filters
12 High-Performance Fans: Maintain ample airflow to keep equipment cool
2-year limited warranty

Overview
The SmartRack 42U Standard-Depth Rack Enclosure Cabinet protects sensitive electronic equipment from harsh conditions that would overwhelm a typical rack enclosure, including falling dirt, dust, drips and splashes. It is ideal for use in factories, construction areas, utility plants, warehouses and other areas high in moisture, dust and debris. It can protect your equipment from falling dirt, dust, drips, splashes and accidental contact with personnel. The front and rear doors have ventilating louvers instead of open mesh. They also have a sealing gasket around the door frames. On the front door there are built-in dust filters. The filters are removable and they can be replaced with standard furnace filters – they’re simple, inexpensive and effective. To compensate for the added air resistance of the filters, there are 12 large, high performance fans to the rear door. The fans pull air through the enclosure, from front to rear. The roof of the enclosure is sealed with a cap that keeps drips and falling dirt from getting inside the enclosure. Since the doors and top are sealed, cable access is provided through 6 cable ports – 2 in the roof, 2 below the rear door, and 2 in the unit floor. They allow cables to pass through, but they block the area around the cables maintaining protection. The enclosure may be subjected to extreme vibrations and movements produced by vehicles and machinery. The heavy-duty steel frame supports up to 3000 lbs (1360.8 kgs). The large-diameter industrial casters also support up to 3000 lbs (1360.8 kgs), which means you can move the enclosure fully loaded. This is useful where you can install all your equipment in a clean environment, close the enclosure and wheel it to the dirty environment with all your equipment already protected. After the enclosure is in place, the levelers allow you to compensate for minor floor variations and make sure everything is stable. If you need to build a data center in the middle of your factory floor, you can do it with this enclosure. It’s perfect for locations like factories, power stations, construction areas, shipping facilities, warehouses, processing plants, transport hubs and anywhere you need to protect equipment in a harsh working environment.

Features
Protection from falling dirt, dust, drips, splashes and accidental contact with personnel.
Can withstand extreme movement and vibrations of heavy machinery and vehicles
Heavy duty steel frame supports 3000 lbs (1360.8 kgs)
Large diameter industrial casters supports 3000 lbs (1360.8 kgs) which allows the enclosure to be moved fully loaded.
Front and rear doors have ventilating louvers and a sealing gasket around the door frames.
Built-in removable dust filters that can be replaced with standard furnace filters.
12 large, high-performance fans in rear door that pull air through the enclosure, from front to rear.
6 cable ports allow cable access while maintaining dust and moisture resistance.
Accommodates all standard 19-inch rackmount equipment.
Ships fully assembled for rapid deployment.
Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance

Package Includes
SmartRack 42U Standard-Depth Rack Enclosure Cabinet
(4) Side panels
(4) Side panel locks
(2) Keys for door and side panels
(50) M6 screws
(50) M6 cage nuts
(50) M6 washers
(2) Air filter
(3) AC power cords
Owner’s Manual
RoHS compliant

Specifications
UPC Code 037332159298
Device Compatibility Patch Panel; Network Switch; UPS; Server
Rack Type Enclosure

INPUT
Nominal Input Voltage(s) Supported 120V AC
Nominal Input Voltage Description 120V 50/60 Hz
Input Plug Features NEMA 5-15P
Input Cord Length (m) 1.83

PHYSICAL
Color Black
Factory Preset Rack Depth (cm) 70.5
Factory Preset Rack Depth (mm) 705
Maximum Device Depth (cm) 93.98
Maximum Device Depth (mm) 940
Minimum Device Depth (cm) 10.16
Minimum Device Depth (mm) 102
Rack Height 42U
Shipping Dimensions (hwd / cm) 218.44 x 114.30 x 64.77
Shipping Weight (kg) 199.58
Unit Dimensions (hwd / cm) 202.692 x 60.02 x 109.22
Unit Weight (kg) 140.61
Weight Capacity – Rolling (kg) 1,361
Weight Capacity – Stationary (kg) 1,361
Rack Depth Standard
Number of Vertical Mounting Rails 4

ENVIRONMENTAL
Audible Noise 59.8 dBA @ 3 METERS
SPECIAL FEATURES
Built-in Cable Management Yes
Extra Wide No

STANDARDS & COMPLIANCE
Certifications EIA/ECA-310-E and Standards, RoHS
Approvals RoHS

WARRANTY
Product Warranty Period (Worldwide) 2-year limited warranty

Reviews

There are no reviews yet.

Be the first to review “SmartRack 42U Standard-Depth Rack Enclosure Cabinet for Harsh Environments”

Your email address will not be published. Required fields are marked *

Request a Quote